Happy reading. TL;DR is "Call Stein or AFS for packages and / or other options"
http://vansaircraft.com/pdf/AvionicsUpdateFinal.pdf
http://vansaircraft.com/pdf/AvionicsUpdateFinal.pdf
Last edited:
Small pet peeve:
"Yaw Dampener" should be "Yaw Damper".
Another pet peeve is when pilots spell "hangar" incorrectly.
(OK, I feel better now. Thanks!)
The Serial TX and RX have to make their way from the ADSB-IN plug on the magic box, out to the correct two wires on the 37-pin plug into the Dynon screen (where they connected to one of the unused-before-the-ADSB Dynon serial ports). They did not. Traced them, checked every pin connection, power off or on - that plug on the AV5000 went to no serial port at all.
Those top screw holes have to be countersunk. As the canopy comes down, it will hit those screws.
Small pet peeve:
"Yaw Dampener" should be "Yaw Damper".
Another pet peeve is when pilots spell "hangar" incorrectly.
(OK, I feel better now. Thanks!)
This picture is at Steins shop. The screws are a temporary mount.
Thanks, Roger