Hi,
Now completed my build (RV14A) and now configuring my (full suite of) Garmin avionics with Van's trim servos. Still on the ground - not flown yet.
I appear to have all the correct trim movements including when using the Auto Pilot as per the configuration instructions ie heading left/right and pitch up/down. However, the G3X on screen Flight Director image and instruction appear to be the opposite.
When the Flight Director says 'Trim Down' I have to move the GMC507 wheel to the 'Up' direction to centralise the on screen image.
I would be most grateful of assistance to solve this concern I have.
Regards John
Now completed my build (RV14A) and now configuring my (full suite of) Garmin avionics with Van's trim servos. Still on the ground - not flown yet.
I appear to have all the correct trim movements including when using the Auto Pilot as per the configuration instructions ie heading left/right and pitch up/down. However, the G3X on screen Flight Director image and instruction appear to be the opposite.
When the Flight Director says 'Trim Down' I have to move the GMC507 wheel to the 'Up' direction to centralise the on screen image.
I would be most grateful of assistance to solve this concern I have.
Regards John