FlyBoy8
Active Member
The plans call for a #28 drill for the AN507-6R6 screws that attach the W-822 access plates to the spar platenuts (K1000-06).
I have a #27 drill in my tool kit from Cleaveland and the cleaveland cheatsheet shows a #27 drill for fiinal size for an AN509-6 screw.
Is it OK to use the slightly larger (.1440) here in place of the #28 (.1405)?
I have a #27 drill in my tool kit from Cleaveland and the cleaveland cheatsheet shows a #27 drill for fiinal size for an AN509-6 screw.
Is it OK to use the slightly larger (.1440) here in place of the #28 (.1405)?