HFS
Well Known Member
These are the "Pop" rivets used in some of the older builds on the tanks to close out the rear (forward facing flange) baffle - between the baffle flanges and tank skin.
Their shorter "brother", AK41-H's are a used for repair of "leaking" rivets between the tank skin & rib - but with a little "modification" I make to become an "Oops" rivet replacing the -3 bucked rivet from the original build.
Sometimes the standard size AK41's & 2's can be hard to come by.
Hansen Rivet & Supply Co. (Pacoima, CA) is my supplier and will sell in small quantities.
YMMV - with other suppliers, but Hansen has them.
HFS
Their shorter "brother", AK41-H's are a used for repair of "leaking" rivets between the tank skin & rib - but with a little "modification" I make to become an "Oops" rivet replacing the -3 bucked rivet from the original build.
Sometimes the standard size AK41's & 2's can be hard to come by.
Hansen Rivet & Supply Co. (Pacoima, CA) is my supplier and will sell in small quantities.
YMMV - with other suppliers, but Hansen has them.
HFS
Last edited: