Now that I have sorted me flap travel asymmetry, I need to adjust my "Show Planes" FPS to shorten the flap down travel slightly, and to stop the actuator from running on when flaps are fully up. The motor stops OK at full flap down.
Can anybody who has done either of these adjustments, or who understands the switching logic, plse advise in which direction I should adjust the Switch bracket and/or the Positioning Rod.
Thanks
Graham
Can anybody who has done either of these adjustments, or who understands the switching logic, plse advise in which direction I should adjust the Switch bracket and/or the Positioning Rod.
Thanks
Graham