3D Printed Drill Bit Organizer

[charlesmc]

To speed access to common RV drill bits, I created a drill bit organizer in F3D and then 3D printed it. I've found it to be very useful, so I thought I'd post the design.

The slots to the right are unlabeled for misc. drill bits, but if there is a common size that I missed, let me know and I'll add it.

Link below

Drill Bit Organizer for Van＇s RV Aircraft by Charles Clinton | Download free STL model | Printables.com

Toolbox organizer for drill bits that I frequently use while building a Van＇s RV-10 aircraft | Download free 3D printable STL models

www.printables.com

 

[scard]

To speed access to common RV drill bits, I created a drill bit organizer in F3D and then 3D printed it. I've found it to be very useful, so I thought I'd post the design.

The slots to the right are unlabeled for misc. drill bits, but if there is a common size that I missed, let me know and I'll add it.

Link below

Drill Bit Organizer for Van＇s RV Aircraft by Charles Clinton | Download free STL model | Printables.com

Toolbox organizer for drill bits that I frequently use while building a Van＇s RV-10 aircraft | Download free 3D printable STL models

www.printables.com

Concept is good. I admit, I have RV specific bits tossed into a bin that I have to hunt through sometimes (rarely use anything other than good machine tool length anymore). How did you standardize on those crazy long length bits? They have their place, but are "specialty".

 

[charlesmc]

Those are all the drill bits that came in the Planetools kit. Everything came in aircraft length.