What's the 3/4 turn method for oil filter torque?
I assume it is:
- use a marker to label 90deg / 180 deg / 270 deg / 360 locations (and maybe in between)
- after screwing on the oil filter, from the moment the gasket touches the body, using the markings as reference, ensure it's been turned an additional 270 degrees?
- safety wire.
I assume it is:
- use a marker to label 90deg / 180 deg / 270 deg / 360 locations (and maybe in between)
- after screwing on the oil filter, from the moment the gasket touches the body, using the markings as reference, ensure it's been turned an additional 270 degrees?
- safety wire.