Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Deburring Tools
- Thread starter raabs
- Start date
1bigdog
Well Known Member
I got a tool kit from Cleaveland tools which included a speed debur (buy an extra bit so you have a separate bit for fibeglass) and a debur handle and kit from Shaviv. I think ACS also carries that handle and bits.
Cheers.
Thanks. I have a bunch of scotchbright pads and a few deburring tools for drilled holes etc. How about scotchbrite wheels for skin edges, lightning holes and edges of parts? What works well on die grinder dremmel or bench grinder?
I have used the 3m 1" wheels from Cleaveland https://www.cleavelandtool.com/shop/category/deburring-44 on a milwaukee cordless die grinder quite a bit as well as the 3m light deburring wheel on a harbor freight buffer. The other thing that works well is some fairly fine grit sandpaper by hand or using a small dowel or piece of wood to back it and get in tighter areas.
1bigdog
Well Known Member
I don’t think I used the wheel at all. I have a polished skin so I was being very cautious. I did use the pads for ribs and maybe a bit on the skin edges. They had an edging tool that put a chamfer on the skins. It worked well but a bit tricky to use. It doesn’t seem to be in their catalog now. It’s available at acs
Shaviv Deburring Tool Mango II Heavy Duty Sheet Metal Cleaner Set | Aircraft Spruce Canada
Shaviv Deburring Tool Mango II Heavy Duty Sheet Metal Cleaner Set For heavy-duty deburring of materials with single or double straight edges up to 0.56 inch (14 mm) thick.
