Hi. Does anyone of you have the internal schematic of the Whelen Strobe Lights Power supply Model HDACF?
Thanks,
Ariel
RV8A
4X-OAA
Thanks,
Ariel
RV8A
4X-OAA
Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Whelen Strobe lights Power Supply
- Thread starter ariel_arielly
- Start date
Most of them are in the trash where this unit belongs. Switch to led 
Agree completely. And the goods new is the changeover is easy. Hardest part is taking out some flooring to get at the power supply. So remove the power supply. There are five wires going out to the wingtip with the old Whelen nav/strobes. You only need 4 for the LEDs and that includes the sync wire. Splice the wires under the floor in the appropriate manner (it's not hard, after all, I did it). Your done, you don't even need to change any switches.Most of them are in the trash where this unit belongs. Switch to led
Agree with others, LED technology has overtaken xenon flash tubes, at lower cost. But if you want to look inside, remember those capacitors can store high voltages for some time. Don’t assume anything, carefully discharge (use an insulated ground wire) the capacitors before anything else.
Stop by I'll give you one, I have many laying around removed for LED replacement.
