ES-00077 protrusion

[Blain]

My Legacy kit didn’t have the 4 mounting holes punched in the floor ramp. I’ve located it fore and aft by the cover plate but I have no idea how much it protrudes, if at all. Anyone with wings off that can take a measurement?

 

[Tony_T]

There is a template for drilling those 4 mounting holes. It is part # F-00033 and is still available from Van's store.



You can buy digital plans for your legacy 12 from Van's as well.

 

[Blain]

There is a template for drilling those 4 mounting holes. It is part # F-00033 and is still available from Van's store.

View attachment 104210View attachment 104209

You can buy digital plans for your legacy 12 from Van's as well.

Well, that’s pretty handy. I have the -12 flash drive and I’ve never run across this. Ordering one today.

 

[Tony_T]

Well, that’s pretty handy. I have the -12 flash drive and I’ve never run across this. Ordering one today.

The wing connector upgrade came out in 2011 and is Section 31A. It may not be on the later flash drive plans! I will try to attach the file here.