Working on wiring the ziptips so studying the only piece of info that came with them, this diagram: https://www.aveoengineering.com/wp-content/uploads/2021/07/AveoZipTip-III_wiring_RevD-scaled.jpg
1st question is to those who have installed Ziptips along with a VP-X. My understanding is the VP-X is very sensitive to overcurrent conditions, and the Ziptips diagram has you using a 10A breaker to protect a 10A load? For the strobes, it's two 5A peak loads on 1 10A breaker, and for the landing lights it's two 5A continuous loads on a 10A breaker. Has anyone had any issues with VP-X tripping when strobes or landing lights come on?
2nd, Aveo specs 2 AWG 20 wires on a circuit protected by a 10A breaker. Should I upsize this to AWG 16 and replace the wires in the pre-made harness or am I missing something?
1st question is to those who have installed Ziptips along with a VP-X. My understanding is the VP-X is very sensitive to overcurrent conditions, and the Ziptips diagram has you using a 10A breaker to protect a 10A load? For the strobes, it's two 5A peak loads on 1 10A breaker, and for the landing lights it's two 5A continuous loads on a 10A breaker. Has anyone had any issues with VP-X tripping when strobes or landing lights come on?
2nd, Aveo specs 2 AWG 20 wires on a circuit protected by a 10A breaker. Should I upsize this to AWG 16 and replace the wires in the pre-made harness or am I missing something?