We got an email from a customer with the following picture of a seat adjuster that failed. Judging by the way the failure occured, I wonder if one side was not fully engaged in the slot. There are literally thousands of these out there, but this is the first time I've heard of an issue like this. Has anyone seen this before?
Note: The adjuster pictured was one made by us for our Aviator seats. We had to make a version of the adjuster that is 1" narrower to account for the rounded corners on our frame. Otherwise, it is identical to a stock adjuster, and mounted at the same height up from the floor.
Thanks,
Note: The adjuster pictured was one made by us for our Aviator seats. We had to make a version of the adjuster that is 1" narrower to account for the rounded corners on our frame. Otherwise, it is identical to a stock adjuster, and mounted at the same height up from the floor.
Thanks,