istrumit
Well Known Member
Hello all -
I just did my annual CI on my 10 and, as happens, a few counter sunk screws missing, a few screw heads stripped...that kind of thing.
I need to know what a good selection of access plate screws would be, along with those for the wheel pants (there are two diameters of screws on the pants).
I was going to order a set of various screws and washers, some countersunk some not, some short, some not...etc.
I could look at the plans from the builder and find these, but I was hoping for a quick solve.
Thanks,
Scott
I just did my annual CI on my 10 and, as happens, a few counter sunk screws missing, a few screw heads stripped...that kind of thing.
I need to know what a good selection of access plate screws would be, along with those for the wheel pants (there are two diameters of screws on the pants).
I was going to order a set of various screws and washers, some countersunk some not, some short, some not...etc.
I could look at the plans from the builder and find these, but I was hoping for a quick solve.
Thanks,
Scott