VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 10-15-2020, 06:35 AM
design4p design4p is offline
 
Join Date: Jul 2018
Location: CORWEN
Posts: 44
Default Auto Pilot Flight Director

Hi,

Now completed my build (RV14A) and now configuring my (full suite of) Garmin avionics with Van's trim servos. Still on the ground - not flown yet.

I appear to have all the correct trim movements including when using the Auto Pilot as per the configuration instructions ie heading left/right and pitch up/down. However, the G3X on screen Flight Director image and instruction appear to be the opposite.

When the Flight Director says 'Trim Down' I have to move the GMC507 wheel to the 'Up' direction to centralise the on screen image.

I would be most grateful of assistance to solve this concern I have.

Regards John
Reply With Quote
  #2  
Old 10-15-2020, 01:40 PM
BobTurner BobTurner is online now
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 7,031
Default

Without regard to your actual question (?), Id urge you to triple check elevator trim direction, as those on vaf who are DARs report frequently finding it backwards. Elevator tab up for nose down, and vice versa.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:38 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.