Originally Posted by LeeMajors
I bet you I could take my old crappy worn out Harbor Freight creeper as a base and weld myself a couple adjustable cross-bars on the bottom of that to add adjustable height for about half the price of that Aerocreeper.
There's a bunch of them out there, but that one together sounds pretty good to me.
I like the way you think! When the back comes up the seat should come up proportionally or can not reach high enough. Need foam bumpers gonna hit everything. Pants, ailerons etc. Please post your final geometry if you do this.
There is another one (somewhere on the internet) with a hydraulic pump to raise the unit - -my paint shop had a couple and did not recommend them as the pump unit was junk. The geometry was nice.
Where are the electric airplane guys - a nice LiFePO battery and linear actuator and pile of $$$ and time . . . . . . sorry out of scope, been happening to me lately. Cabin fever.
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
Last edited by BillL : 12-14-2020 at 06:47 AM.