VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #51  
Old 02-11-2021, 05:23 PM
rvsxer rvsxer is offline
 
Join Date: May 2007
Location: Inver Grove Hgts, MN
Posts: 353
Default

I've had 2 Robbins heat muffs on my -6 since day one (2000). I had trouble getting them to clamp the pipe tightly until I oversized the tie rod holes slightly. That allows the end cap halves to move past each other a little more and clamp the pipe. 1800 hours and no wear on the pipe.
__________________
Mike Hilger
RV-6 N207AM w/G3X, 1,800 hours +
South St. Paul, MN (KSGS)
A&P, EAA Tech Counselor

We're all here because we're not all there...
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:35 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.