claycookiemonster
Well Known Member
Beginning to consider wire runs. Beginning with wires from the wings. Big hole aft of the Spar insert in the fuse, and then two grommeted holes through the Spar on each side. And, then where do I go?
The left side has the fuel valve and fuel lines going through the gear tower and no other openings through the tower. The right tower has one hole going forward, but is that all I get?
Or, do the wires climb up the aft side of the gear towers and then go forward near the top?
The left side has the fuel valve and fuel lines going through the gear tower and no other openings through the tower. The right tower has one hole going forward, but is that all I get?
Or, do the wires climb up the aft side of the gear towers and then go forward near the top?