https://photos.app.goo.gl/KL51xfMr6GxqqseU7
https://photos.app.goo.gl/j1QbPeETepm1QU8R7
https://photos.app.goo.gl/jsDow3kZwsZkDYH17
https://photos.app.goo.gl/FoRJTzPfNx5KvmdMA
Hopefully you can see pics now.
I need a little help guys.
My Sam James cowl has been fitted up nicely to the firewall. All the Skybolt fasteners installed.
I used the alignment tool from Flyboys which I really liked.
At the inside of the inlet rings to the spinner opening I have some misalignment and want to know the best way to remedy this.
I started tonight to build the flange behind the lower cowl but it sits proud of the upper cowl.
Thank you
Arnie
https://photos.app.goo.gl/j1QbPeETepm1QU8R7
https://photos.app.goo.gl/jsDow3kZwsZkDYH17
https://photos.app.goo.gl/FoRJTzPfNx5KvmdMA
Hopefully you can see pics now.
I need a little help guys.
My Sam James cowl has been fitted up nicely to the firewall. All the Skybolt fasteners installed.
I used the alignment tool from Flyboys which I really liked.
At the inside of the inlet rings to the spinner opening I have some misalignment and want to know the best way to remedy this.
I started tonight to build the flange behind the lower cowl but it sits proud of the upper cowl.
Thank you
Arnie
Last edited: