I "finished" my RV-14A in November of 2020. I decided that I didn't have the skill to give it the paint job it deserved. I contacted Jon McCormick at Plane Schemers / Evoke Aviation (Gadsden, Alabama) and got a slot.
While the paint job wasn't cheap, the job they did was SO GOOD that it seems like a steal. They did an amazing amount of prep work and then applied an absolutely stunning paint job (Imron with a clear coat). The work quality was perfect -- these guys really know what they are doing.
I tried to link photos above, if they don't show up, I apologize.
The other thing that really stood out to me was their attention to detail. As I was taxiing away from their hangar, they were walking along beside the airplane wiping the last little dirt smudge off the wingtip.
The only bad news is that they are so popular that they have a waiting list. So, if possible get your slot early - you will not regret it.
Bruce
2020 RV-14A N662F Flying
2007 RV-10 N662G Sold
2003 RV-8 N297NW Sold
While the paint job wasn't cheap, the job they did was SO GOOD that it seems like a steal. They did an amazing amount of prep work and then applied an absolutely stunning paint job (Imron with a clear coat). The work quality was perfect -- these guys really know what they are doing.
I tried to link photos above, if they don't show up, I apologize.
The other thing that really stood out to me was their attention to detail. As I was taxiing away from their hangar, they were walking along beside the airplane wiping the last little dirt smudge off the wingtip.
The only bad news is that they are so popular that they have a waiting list. So, if possible get your slot early - you will not regret it.
Bruce
2020 RV-14A N662F Flying
2007 RV-10 N662G Sold
2003 RV-8 N297NW Sold