Installing a ram mount

I want to install a ram mount on the right side of my panel or side wall for a 796. Anyone done this on a -10 and if so, how? I bought a ram ball with a short arm and 2 holes (http://www.rammount.com/part/RAM-B-238U) as that looks like it will keep the mount close to the side wall where I want it.

TIA

~Marc

I didn't want to drill into my side wall, so I used extreme mounting tape. It works very well. http://www.homedepot.com/p/3M-Scotch-1-in-x-1-66-yds-Extreme-Mounting-Tape-414DC-SF/203405976

I have mounted several on the instrument panel. Just a couple of screw/bolt holes and nuts on the back side.

I used the ball mount that you referenced, with a short arm and Rams' X-grip cradle. Bolted through the panel just right of center. I wondered if the X-grip would be adequate to hold my iPad, but it has worked well in moderate+ turbulence.