Trying to help out someone who plans on installing TS Flightline's s.s. Teflon brake lines on a taildragger. Wasn't bad enough that we forgot to install the firewall 45"s before installing the engine mount and engine. We fought with them for quite some time getting them in (tight space after the engine mount is installed). Only to discover today that the fittings used for the TS hoses are smaller. Ended up using a Dremel cutter and cut off the 45 part in order to get the fitting to rotate out. Good news is the smaller fittings were much easier to install than the original (with the engine mount installed).
Perhaps this is in the TS install description somewhere but we missed it if it was.
Perhaps this is in the TS install description somewhere but we missed it if it was.