VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Glass Cockpit
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-06-2022, 05:42 AM
witek witek is offline
 
Join Date: Jan 2013
Location: Poland
Posts: 113
Default Fuel Flow Transducer (Red Cube, FT-60) – possible to repair?

Hi All,

Fuel Flow Transducer (Red Cube, FT-60) – possible to repair?
My FT-60 failed after 177 hours – was installed between fuel servo and spider. Not isolated from heat – so probably this is the reason.
Mechanically everything looks good. Probably electronic parts were overheated.

Question – is this unit reparable? Can somebody exchange the electronical part of this unit?

It cost now around USD 250 so maybe would be worth to repair it. I suppose the most expensive is the mechanical part of this unit.

Witold
Reply With Quote
  #2  
Old 07-06-2022, 05:55 AM
TS Flightlines TS Flightlines is offline
 
Join Date: Apr 2010
Location: Ridgeland, SC
Posts: 3,081
Default

Infortunately no, unless its in the electrical connections to the airframe harness.
Credit Dan Horton for showing us this several years ago---all the internal electronics are potted.

Tom
Attached Thumbnails
Click image for larger version

Name:	Potted Electronics_zpsi7lkgjpc.jpg
Views:	40
Size:	174.0 KB
ID:	27805  
__________________
Tom Swearengen, TS Flightlines LLC, AS Flightlines
Joint Venture with Aircraft Specialty
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7A Tail Kit Completed, Fuse started-Pay as I go Plan, on hold while we develop new products for RV builders
Ridgeland, SC
www.tsflightlines.com, www.asflightlines.com
Reply With Quote
  #3  
Old 07-06-2022, 12:34 PM
paszekj paszekj is offline
 
Join Date: Mar 2011
Location: Englewood, CO
Posts: 29
Default

Are these the standard red cubes that come from Van’s? I did SDS EFI in my build so didn’t use them. I’ve been meaning to return them to Van’s but haven’t gotten around to it yet (need to quickly as my 2-yr window is coming to an end). I’ll gladly give you a good deal on one. Feel free to PM me.
__________________
John Paszek
Englewood, CO
RV 14A N615BJ (hangared at KCFO)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:56 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.