4 into 1 exhaust

[DanH]

https://www.aircraftspruce.com/catal...?clickkey=4330

[cjhammes]

Originally Posted by dpansier

I had to shorten the loops a bit for proper clearance, after adjustment, crimped on a short piece of Alum tube on the end of the cable.
Used a standard terminal crimper to make the crimp.

Thank you.

[dpansier]

I had to shorten the loops a bit for proper clearance, after adjustment, crimped on a short piece of Alum tube on the end of the cable.
Used a standard terminal crimper to make the crimp.


Correction, I used Stainless tube.

[hoyden]

Does anyone know if there are other manufacturers of 4 into 1 besides AWS and Sky Dynamics? My bit of looking has not been successful. I don't need one right this minute but if one was available I would seriously consider purchasing it.