I had to shorten the loops a bit for proper clearance, after adjustment, crimped on a short piece of Alum tube on the end of the cable.
Used a standard terminal crimper to make the crimp.
Thank you.
__________________
Charlie Hammes
RV-8, N525RV Flying
RV-8, N208CH in process
I had to shorten the loops a bit for proper clearance, after adjustment, crimped on a short piece of Alum tube on the end of the cable.
Used a standard terminal crimper to make the crimp.
Correction, I used Stainless tube.
__________________
Don Pansier
Green Bay, WI (GRB)
RV-7
Does anyone know if there are other manufacturers of 4 into 1 besides AWS and Sky Dynamics? My bit of looking has not been successful. I don't need one right this minute but if one was available I would seriously consider purchasing it.
__________________
RV-6 IO-360, CS
RV-9 QB under construction
I really like the cable hangers, as compared to the bent tube and hose contraptions on most RVs. Light, compact, simple, but of course I've been curious about how long they might last. Well, I finally broke one. It took 1100+ hours.
I have a crimper, cable stops, and cable. 10 minute fix.
.
__________________ Dan Horton RV-8 SS Barrett IO-390
Linear Mode
