I have FAB-HORIZON INDUCTION-1 filtered snorkel/airbox for IO-360 as sold in 2009. changing air filter requires disconnecting the airbox and dropping it down a few inches so the filter will slide out past the lip of the airbox. that requires removal of a dozen 6-32 screws that sandwich the filter tray between airbox and baffle, and also the 4 wired bolts that hold the airbox to the carb flange.
Has anybody come up with a "quick access" filter setup? It appears to be a simple fix to notch the front of the airbox about 5/8" then the filter would just slide in and out--and then to attach a removable plate to cover the notch once the filter is seated?
thanks for any suggestions.
Has anybody come up with a "quick access" filter setup? It appears to be a simple fix to notch the front of the airbox about 5/8" then the filter would just slide in and out--and then to attach a removable plate to cover the notch once the filter is seated?
thanks for any suggestions.