You will definitely have to research, plan, and execute with care. Although I installed all SkyBolt, My next venture will certainly be with hinges, save the lower firewall issues.
I had the idea of maintenance issues and trouble with removal/installation. My 10 Friend used stock hinges and he can have it off or on as fast as me, maybe faster for removal. The gaps are tight, the loading is spread more evenly down the interface lines, and the lines are clean in paint.
One thing, keep in mind the 1/4 turns are not axially fixed, and are held in place only by the compression of an internal spring and friction. It does a allow a little movement that frets and dusts at contact points. You can make some experimental pieces to try this out for yourself. A little applied research.
Hinges are a more rigid connection with less movement opportunity.