I am about ready to do the trailing edge of my rudder and remember seeing comments about not needing the dobs of RTV or pro-seal between the stiffeners on the newer models. My plans still mention it. On the newer kits do you still need the RTV/pro-seal between the stiffeners to prevent cracking or do the heavier skins and longer stiffeners take care of it. I'm going to use pro-seal on the trailing edge but just have a tiny 2 oz container from Van's as they said that was all I would need for the rudder. I don't think there is enough to do the dobs, so if needed I will get some RTV. Thought I would check and see what others are doing.
Thanks,
Thanks,