View Single Post
  #9  
Old 04-14-2010, 03:20 AM
paul330 paul330 is offline
 
Join Date: Feb 2007
Location: Mpumalanga, South Africa
Posts: 1,065
Default

Thanks Andy. I am going to drill and dimple in the same way as the F1018. Page 29-17 shows that they have to be done at some time and leaving till after it's riveted in place means you would have to use a pop rivet dimpler and probably have to grind down the die to fit against the flange. As for the intercostal, those holes can be countersunk through the 2 layers.

Right - build on!
__________________
Paul
Mercy Air, White River FAWV
RV-10 ZU-IIZ - "Zeus"
Building Bearhawk Bravo - RV-18 not available
2019 Donation Made
Reply With Quote