View Single Post
  #4  
Old 01-12-2021, 10:32 AM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,317
Default Lift fuse

On my 7a, I use the rotisserie. I lift the tail and Sweetie puts a sawhorse under the center section. Then lower the tail and the rotisserie comes off the ground. If it needs to be higher, add couple of 4x4s under the rotisserie and repeat. That all ends pretty soon. Gear and engine will be going on.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote