Quote:
Originally Posted by Marc Bourget
it appears by the bypass that the baffles never come in contact with the fins?
|
There are virtually no fins in the area where the bypass duct goes. This is the entire problem, and why the duct is needed.
If there were adequate fins, then the fins/baffling would create the passage that the duct does. As things are, the baffling hits a fin less area of the head, and stops the airflow.
See this post from a prior thread.
http://www.vansairforce.com/communit...7&postcount=23
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."