from reading threads on this forum it seems that sizing the first filter downstream of the sump but before the pumps be 70 micron and the filter before the injectors be 30 micron.
my first filter is an aeromotive with a 100 micron screen and just before my injectors is a 20 micron. this 20 micron is a big can filter with a pleated lining. the can is probably 21/2 diameter, 31/2-4'' long.
this set up is for a 100 hp engine.
although my numbers aren't ideal, do i really need to change ?
my first filter is an aeromotive with a 100 micron screen and just before my injectors is a 20 micron. this 20 micron is a big can filter with a pleated lining. the can is probably 21/2 diameter, 31/2-4'' long.
this set up is for a 100 hp engine.
although my numbers aren't ideal, do i really need to change ?