View Single Post
  #22  
Old 07-07-2022, 01:53 PM
lr172 lr172 is offline
 
Join Date: Oct 2013
Location: Schaumburg, IL
Posts: 7,697
Default

Quote:
Originally Posted by jask View Post
I was watching an RV6A landing a few months ago. I was 300 or 400 feet away but when the nose wheel touched down, probably at about 30 kts, there was a rapid oscillation of the gear fore and aft of several inches maybe about 6 times. The force to bend the nose gear must be huge.
It is. It is spring steel, so the oscillations you see are typical. People on the field are always telling me something is wrong with the nose gear after seeing me land or taxi. Leg needs to give on hard landings, so spring steel, struts or some sort of rubber doughnuts. Not saying it is a good or bad design only that it takes way more force than a locked up 4" rubber tire to bend it.
__________________
N64LR - RV-6A / IO-320, Flying as of 8/2015
N11LR - RV-10, Flying as of 12/2019

Last edited by lr172 : 07-07-2022 at 01:57 PM.
Reply With Quote