View Single Post
  #16  
Old 06-15-2020, 05:05 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,198
Default Preview plans

Quote:
Originally Posted by jls32 View Post
I'm a new builder and ordered the empenage kit. I expected there to be a nice manual, bound, with all the drawings. I got a USB and only the tail docs included. In short, I thought the "Preview Plans" would be included.

Is it worth paying $55 to have Vans print them out nicely and bind them? Is there anything I'm missing? Some of the pages seem to be 8.5x11 and others 17x11 with side by side pages, so it's kind of a mess to print.
In my opinion, yes. However, as you mentioned, printing is a mess. Some pages are landscape, some portrait, some 8.5x11, some 11x17. It's tough just printing revisions.
I have an extra Preview Plans Manual if you want it. I don't use it. You may have to print some of the revisions for it. Shoot me an e-mail or come up. I'm building a 7A in Estes Park.
You will get full size plans, ~24x36, with each kit. Buil a plans easel somewhere in the shop.
Those of us not building a 14 have to work with what we can!
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.

Last edited by wirejock : 06-15-2020 at 05:07 PM.
Reply With Quote