Wiring the DB25 for Dynon Intercomm

[comfortcat]

I see a ton of wire heading to the dynon intercom, with many grounds. Anyone have a picture of how they got all that wire connected?

advTHANKSance

CC

 

[MikeyDale]

Take a deep breath. Take your time. Say a prayer. And get it done!

http://4.bp.blogspot.com/-Wzvcy1iT9ww/UmK13zV2-qI/AAAAAAAAAcs/m7Qa-v_ZSXs/s1600/20131017_082926.jpg

http://2.bp.blogspot.com/-rPbNrNR4ZbA/UmK18lP-94I/AAAAAAAAAc0/L8o_EIbxHfs/s1600/20131019_111643.jpg

 

[MikeyDale]

I hope this is what your looking for.

 

[az_gila]

Different Back Shell

If you use this style of Mil-Spec back shell with a flat clamping area it will be easier getting all of the wires and ground daisy chains in.

The hardest part may be remembering to slip the one-piece back shell over the bundle before inserting the contacts into the connector.

Digi-Key has them

http://www.digikey.com/product-detail/en/DB24659/1003-1051-ND/2403827

I believe Garmin uses a similar style for some of their avionics trays.

 

[comfortcat]

Perfect!!!

Thanx guys!

This is exactly what I needed.

Now, just make it work for me...

BTW: Even if I do not have the radios attached yet, can I still test the intercom with two headphones and power to the unit?

Dkb