Wing tip local ground

[jwilbur]

Would anyone mind putting up a picture of your local grounding in your RV10 wing tip - (and also for pitot heat if different)? I'm considering something like this ground strip with these terminals but I'm concerned that they're held on by friction only.

 

[rleffler]

Call me anal, but I ran a ground wire from the wingtip to the forest of tabs on the firewall.

The Faston terminals in your link will work just fine. Just try and pull one off and you'll understand.

Although, wouldn't it be easier to just put a bolt through the last rib and use a ring terminal for the ground wire?

bob

 

[Mike S]

Just a simple hole, screw, and ring terminals.

 

[pazmanyflyer]

Here's what a local to me 2 time builder has done for wiring and local grounding at the wing tips. I plane to do a similar setup.

http://www.vansairforce.com/community/showpost.php?p=673363&postcount=4

Thank you Darwin for the idea and pic's.

 

[jwilbur]

Many thanks

Thanks for the tips, everyone. This is all helpful.