Michael Burbidge
Well Known Member
The wing kit came with wiring harness. I'm going with Garmin GX3 system. It came with 4 basic harnesses. Two for lighting, one for each wing (WH-00011) One for the roll servo (WH-00013) and one for the ADAHRS (WH-00012).
Will the WH-00013 and WH-00012 work out of the box with garmin roll servo and GSU-25?
Also, does the ADAHRS mounting bracket accommodate the GSU-25. Putting it inside the wing at that location looks like a very difficult spot for it in terms of maintenance. Any experience with this location would be appreciated.
I find the wiring harnesses that ship with the kit to be frustrating because there is so little information about how to apply them to Garmin GX3 and the CAN Bus.
Will the WH-00013 and WH-00012 work out of the box with garmin roll servo and GSU-25?
Also, does the ADAHRS mounting bracket accommodate the GSU-25. Putting it inside the wing at that location looks like a very difficult spot for it in terms of maintenance. Any experience with this location would be appreciated.
I find the wiring harnesses that ship with the kit to be frustrating because there is so little information about how to apply them to Garmin GX3 and the CAN Bus.