N18RA
Active Member
I purchased a partially completed RV-8 Kit about 6 months ago and have finally gotten to the wing installation. Here is the dilema, the Spar center section in the fuselage is a little tight for the spars to go in. Now here are the questions..
1. how tight is too tight for the wing spars to mount into the fuselage?
2. if it is too tight, what do i do to correct the problem?
any help or ideas are appriciated..
Thanks
Ben
1. how tight is too tight for the wing spars to mount into the fuselage?
2. if it is too tight, what do i do to correct the problem?
any help or ideas are appriciated..
Thanks
Ben