Several months ago I fit the wings to the fuse and drilled the rear spar. Today I rechecked all the measurements and found that one wing is 0.1 degree too high, and the other is 0.1 degree too low. The only fix I can think of is to find a way to drill the rear spar attach slightly oversize while shifting the hole a bit. I figure each hole would have to move about 3/64 inch. Obviously this is a delicate operation and could easily make the situation worse. Is a 0.2 degree difference between wings significant? Will I only be able to fly in circles? Boy this really sucks right now.
Last edited: