Auburntsts
Well Known Member
So I'm working on my Emp tip fairings and all fit reasonably well except the VS. There is a considerable gap at the forward edge between the fairing and the VS. For some reason the fairing's shape does not match the cross section of the VS so it won't seat far enough forward to match the leading edge of the VS -- does that make sense (I don't have a pic). IOW, when the fairing is in-place its leading edge is sitting about 1/8" behind that of the VS (the rear edges of the fairing and VS are flush). I can fix it by building up the leading edge of the fairing with Micro to match the VS, but that's a lot of extra work. Did anyone else run into this problem? Do I need some cheese with my whine?