David Paule
Well Known Member
This little brass hammer is now on its third or fourth homebuilt. I didn't make it, but I use it almost every day. Doesn't look like much but it's really very useful.
The brass head is 5/8 inch diameter by 2 1/4 long. The hole is 1/4 inch diameter and the handle is about 6 3/8 inches long, including the part inside the head. Looks like a small nail expands the tang of the handle in the head.
Carve the handle for comfort.
Dave
![msmxx0.jpg](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2Fmsmxx0.jpg&hash=9c986a67be9788ae9b33b53d2850b108)
The brass head is 5/8 inch diameter by 2 1/4 long. The hole is 1/4 inch diameter and the handle is about 6 3/8 inches long, including the part inside the head. Looks like a small nail expands the tang of the handle in the head.
Carve the handle for comfort.
Dave