alpinelakespilot2000
Well Known Member
I am working my way through the preview plans for the -9. At the beginning of Section 7: Wings, under the section "Getting Ready," the plans say, "modify the vertical stabilizer h-frame into a wing assembly fixture." (p. 7-1, version 3/14/03)
However, I cannot find anywhere in the empennage section (version 2-27-04), and certainly not in the VS section, where they suggest building/using an H-frame fixture. Am I missing something? The only jig I thought was generally used were the cradles.
Are other people using an H-frame jig on any of the emp. components? It seems this would be a good idea, allowing access to both sides, but if so, how are they connected to the jig?
Clarifications or suggestions greatly appreciated.
Thanks,
Steve
However, I cannot find anywhere in the empennage section (version 2-27-04), and certainly not in the VS section, where they suggest building/using an H-frame fixture. Am I missing something? The only jig I thought was generally used were the cradles.
Are other people using an H-frame jig on any of the emp. components? It seems this would be a good idea, allowing access to both sides, but if so, how are they connected to the jig?
Clarifications or suggestions greatly appreciated.
Thanks,
Steve