yankee-flyer
Well Known Member
Installed the oil tank today (P. 49-06). Step 3 says to make the oil tank vent from .062-x 3/8 104-0375062 tube. Nothing in the FF kit by that description but there is 30" of .062 x 3/8 translucent plastic tube. Used that, got to Step 7 and it says (and shows in the drawings) to put a double bend in the tube to clear the lower fuselage flange. It's plastic-- no way to put a double bend in that. Hope this is one of Van's jokes-- or else I used the wrong piece-- again!
Wayne 120241
Wayne 120241