Yes, that's right...my laziness knows no bounds. Had to cut a bunch of notches in the F-703B panel stiffening angle. Instead of the usual drilling, cutting, and filing, I took an alternate route. Posting here in case anyone else aspires to be as lazy as I am:
Made a template (shown laying upside down here):
Used some guide bushings in the router with a 1/8" diameter router bit:
Test part (view from below):
Finished F-703B. Took maybe 1 or 2 minutes per slot.
A close-up view:
Have fun!
Made a template (shown laying upside down here):
Used some guide bushings in the router with a 1/8" diameter router bit:
Test part (view from below):
Finished F-703B. Took maybe 1 or 2 minutes per slot.
A close-up view:
Have fun!