jsharkey
Well Known Member
I am running the pre-made cable for my UMA electric tach. It has relatively large connectors on each end. Any suggestions for getting it through and sealed in the firewall without cutting and re-splicing it?
The connectors are too big to fit through the standard Van's type plastic bushings used for other pass throughs and which are then gooped with high temperature RTV.
Jim Sharkey
RV6 Wiring etc
The connectors are too big to fit through the standard Van's type plastic bushings used for other pass throughs and which are then gooped with high temperature RTV.
Jim Sharkey
RV6 Wiring etc