Bill.Peyton
Well Known Member
Installed the pitch servo using the Tru Trak supplied bracket and hardware. I am concerned that the torque multipier arm could get hung up on the top rear bolt head. I ended up shimming the oposite end with an additional washer to kick the back end of the arm further away from the bolt head. I believe the correct solution is to use a countersunk screw and let the threads protrude through to the servo housing and safe tie the screw on that end.
I know this probably belongs in the A/P section, but it is RV-10 specific.
Anyone else see this as an issue?
I know this probably belongs in the A/P section, but it is RV-10 specific.
Anyone else see this as an issue?
![IMG_1918.jpg](/proxy.php?image=https%3A%2F%2Flh6.googleusercontent.com%2F--G658RQJ2MI%2FTl2GZTrPnvI%2FAAAAAAAABbs%2FWzB8gtKiMmk%2Fs800%2FIMG_1918.jpg&hash=cba2cf0d496c5bb7a72a217396fde961)
![IMG_1917.jpg](/proxy.php?image=https%3A%2F%2Flh3.googleusercontent.com%2F-4i6Ft3SIn2Y%2FTl2GTpWTI9I%2FAAAAAAAABbo%2FsW4JatwOChs%2Fs800%2FIMG_1917.jpg&hash=b5f65d0211a868d7f1f6ac2f8c4ad793)