Options are a truck that picks up dead/wrecked cars. Concern is pulling up the steep tilt bed angle by the gear legs at the motor mount. Might be 600 lbs without wings.
20Ft construction trailer for bobcats and mowers, Again even with ramps, you gotta get it up there.
A little uhaul car caddy. Front tires go in a depression and ratchet straps hold the tire down. This is really attractive except for concern how squirrely the tailwheel might be. With pneumatic tire and full swivel it should trail well. the risk is how stable the tires are in the depressions and ratchet straps > Another option is secure tail wheel to the trailer tongue and let the fuse ride on the two main tires. I have reservations about pulling on the fuse tail at the stinger mount.
Your experience and opinions are appreciated
20Ft construction trailer for bobcats and mowers, Again even with ramps, you gotta get it up there.
A little uhaul car caddy. Front tires go in a depression and ratchet straps hold the tire down. This is really attractive except for concern how squirrely the tailwheel might be. With pneumatic tire and full swivel it should trail well. the risk is how stable the tires are in the depressions and ratchet straps > Another option is secure tail wheel to the trailer tongue and let the fuse ride on the two main tires. I have reservations about pulling on the fuse tail at the stinger mount.
Your experience and opinions are appreciated