DonFromTX
Well Known Member
I am beginning to wonder just how complete these pre packaged took kits really are. Just had to get started, so clamped up the V Stab spar, drilled a couple of holes, then reached for the 3/16 bit for the next hole as called for in the plans. Hmmm, none that size, just numbered bits. Came in to the computer, finally found a conversion from numbered bits to fractional sizes - and there IS NO numbered bit of 3/16 size. No problem, I went to Avery, then Isham, then Cleveland to see if they had a 3/16 but in their sets, nope, none do.
Not a big problem, I DO have a 3/16 bit, but I was wondering if this is typical of these model specific tool kits, or are they just a bunch of higher priced tools to be sold in a group. I wonder what else is missing![Mad :mad: :mad:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Not a big problem, I DO have a 3/16 bit, but I was wondering if this is typical of these model specific tool kits, or are they just a bunch of higher priced tools to be sold in a group. I wonder what else is missing