Idea starter, plenty of variations. Build from scrap. Sure does make prep, paint, polish and transport easy to do. With this on the tip rib all you need are two sawhorses.
1/2" angle, some plate and a length of pipe. (One leg is short here to clear a mag bracket.)
Attach to end rib with six #8's or #10's.
Wing will sit upright on the spar, or flat with the addition of a 2x2.
1/2" angle, some plate and a length of pipe. (One leg is short here to clear a mag bracket.)
Attach to end rib with six #8's or #10's.
Wing will sit upright on the spar, or flat with the addition of a 2x2.
Last edited: