osxuser
Well Known Member
Ok, I was assembling the HS today, somewhere about the third paragraph of the 6th chapter in the plans, it says to drill all the spar to rib holes out to #30 except the HS-708 to 603PP. It should also include the HS-405 to 603PP, since those should be be drilled AFTER the skin is clecoed in place so the can be lined up correctly.
Lucky for me, I justed drilled them based on the centerline of the HS-405 flange, and it was pretty close, I'll have to trim a bit, but the plans could be a bit more clear on this. I also found the placement of the HS-404 and HS-405 on the front spar could be much more clear on the drawing...
Lucky for me, I justed drilled them based on the centerline of the HS-405 flange, and it was pretty close, I'll have to trim a bit, but the plans could be a bit more clear on this. I also found the placement of the HS-404 and HS-405 on the front spar could be much more clear on the drawing...