RV7Guy
Well Known Member
I've been meaning to post this for a while and just remembered. When you are building you don't think about the firewall sound proofing/fireproof blanket until you are about done. Well this is about the worst time to try to prepare for it.
So, while you have the front end open, or at least good access, make templates for sections of the blanket. If you have the blanket material, cut and test fit now. You will be much happier and won't be bleeding all over everything.
When everything is done all you will have to do cut the appropriate holes and slots in the blanket for the firewall pass throughs and glue in place.
So, while you have the front end open, or at least good access, make templates for sections of the blanket. If you have the blanket material, cut and test fit now. You will be much happier and won't be bleeding all over everything.
When everything is done all you will have to do cut the appropriate holes and slots in the blanket for the firewall pass throughs and glue in place.